Vector VN8912 Handbuch PDF herunterladen (Seite 17)

Vector Product Manual

This mini jack allows you to remote control the function of the IFB

button on the front panel. When the two conductors on this jack are

closed together, the main audio input is disconnected from the codec and

replaced with audio on the IFB input.

This is a 3-pin male XLR connector containing balanced output audio. The

rackmount Vector does not mix any local audio into this output. The only

audio heard here will be coming from the far end. The level of this output

is adjustable via the menu system.

This is a 3-pin female XLR connector designed to accept balanced, line

level audio. This audio is sent into the encoder on the Vector and is

reflected on the front panel VU meter. The nominal level of this input is

selectable via the menu system.

This is a 3-pin female XLR connector designed to accept balanced audio

for the IFB function. When IFB is engaged, this audio will be sent to the

encoder instead of the main audio.

This is a recessed level control which may be adjusted with a small screw-

driver. After applying IFB audio, engage the IFB and adjust this control for

proper reading on the VU meter.

When this switch is in (red indicator), the IFB input connector and level

control are set to accept a line-level audio signal (-10 to +4 dBu). When

this switch is out, (black indicator), the connector and control are set for

direct connection to a microphone (-80 to -40 dBu).

UTPUT CONNECTOR

INPUT CONNECTOR

IFB INPUT CONNECTOR

IFB LEVEL CONTROL

IFB MIC/LINE SWITCH

16 IFB REMOTE CONTROL

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 56 57

Keine Kommentare

Vector VN8912 Handbuch Seite 17